|The Well PRO™ Dry Pellet Chlorinator
||Kills bacteria at the wellhead source
||Eliminates "rotten egg" odor by eliminating
||Reduces iron and manganese problems by oxidation/precipitation
||Kills iron bacteria that cause slime, pump
and screen clogging, etc.
||Reliable, consistent dosing with less hassle
and maintenance than liquid chlorinators
||Safe, easy loading of pre-packaged pellets
-- NO chemicals handling
||Rugged, weatherproof construction designed
for stand-alone outdoor installation
||Adjustable dosage rate to accommodate any
||Water demand operation. Feeds pellets according
to well pump kick-on and duration
||Offered in either 115V and 220V models to match your well pump voltage
The Well PRO
The first compact low-profile, dry pellet chlorinator
for home well water needs. Foul-smelling, corrosive hydrogen sulfide. Sink-staining
iron and manganese. Slime-causing, pump-clogging iron bacteria. These are
unpleasant, and potentially costly, facts of life in many residential water
Now, the Well PRO dry pellet chlorinator lets you control
these problems at their source (in the well itself) with a compact, low-profile
unit that blends comfortably into any home landscape. Designed specifically
for residential use, the Well PRO chlorinator maintains your yard's aesthetics.
The Well PRO chlorinator is constructed of rugged, matte-black
thermoplastic to resist corrosion from chlorine or the weather and mounts
directly over your well for minimum intrusion on your landscape design.
Safe, simple, fast loading with prepackaged Well PRO pellets
The Well PRO chlorinator's highly concentrated dry chlorine
pellets come in easy-to-store, easy-to-handle 3 1/2-pound containers that
actually serve as the chlorine hopper. Each new container is simply screwed
right into the chlorinator to replenish the chlorine supply, so you never
need to handle any chemicals directly. And there are no fumes or spills
to worry about. After opening the Well PRO chlorinator's protective cover,
remove the power module and unscrew the cap from a full container of Well
PRO pellets. Screw the power module directly onto the full pellet container.
Insert the power module/pellet container assembly in the the Well PRO chlorinator
protective housing and replace the cover.
PLACE YOUR ORDER
On orders totalling $50 or more
Lower 48 USA States Only
Orders for shipment to CANADA must be placed on a different order page.
Please click >> HERE << for that order page.
Be sure you've also selected which Well PRO unit you are
combining with any component in the table above
before clicking the "Add To Shopping Cart" button.
Design simplicity ensures trouble-free performance
Designed specifically for outside installation, the Well
PRO chlorinator's rugged weatherproof construction ensures reliable, uninterrupted
operation in any weather. Easy to install and easy to service if necessary,
the Well PRO chlorinator features precision-tooled, injection-molded components,
few moving parts and a full array of performance features.
The plug-in power module is completely encapsulated in polyurethane
foam to protect it from chlorine corrosion and requires no routine servicing
The rugged drive motor turns on and off according to water
demand to maintain a consistent chlorine residual in the water.
The adjustable dosage rate makes the Well PRO chlorinator
adaptable to a wide range of water problems and water usage characteristics.
System operation based on water usage. The Well PRO chlorinator
is energized only when the well pump operates. Chlorine consumption is
minimized and chlorination efficiency is maximized.
An automatic shutoff device prevents overchlorination if
the well pump remains on for an extended period.
To reduce pellet drop rate lower than system settings, see our pellet plate modification page.
With weatherproof cover removed
Or Call for a FREE 15 min.
Water Treatment Consultation
Or Order by Phone
LOWER 48 USA
Weekdays 8am - 6pm Eastern
||Safety feature (WP1 and WP3): If the
well pump runs for 15
the Well PRO will
|Pellet Feed Rate (Max)
|Pellet Storage (Max)
||34 x 11 x 8 inches (86 x 28 x 20 cm)
||15 pounds (6.8 kg)
||EPA registered: 50510-1
Active Ingredient: Calcium Hypochlorite (70% Available
Pellet Weight: 0.79g (0.28oz.)
One 3.5 lb. bottle of pellets should last approximately
4 weeks under normal operating conditions.
NOTE: these pellets are shaped and weighted to work with the Well Pro system only. Be sure that's what you have before ordering pellets. Must ship as a HAZMAT. Shipping cost for non-warrantable returns of pellets and Well Pro units entirely at customer's expense. Warrantable return shipping cost will be reimbursed. Returns subject to 10% restocking fee exept for warranty or shipping damage claims.
In nearly all circumstances, it is advisable to consider doing a "shock treatment" on a well that has never been chlorinated or on a system you know needs disinfected. The Well Pro will do an excellent job of chlorinating at a "maintenance" level, but there is a better (and cheaper) way to go about performing a shock chlorination of your system than by using these dry chlorine pellets. As a courtesy, we have copied part of a university agricultural extension office's instructions on how to do a shock chlorination on your well and household plumbing using ordinary household bleach. Click HERE to read those detailed instructions. [We'll open that link in a separate browser window so you don't lose your place here.]
Here is the "Installation, Operation and Maintenance Manual" in .pdf format.
Shipping turn-around time between order and delivery is right at one week to most points in the USA. If shipment includes chlorine pellets, which must ship as a "hazmat," that can cause some delay on the part of the carrier. We have no control over carrier (UPS) schedules.
Need well water testing? We wholeheartedly recommend the economical and excellent lab work done by our friends at eWatertest.com.